34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020
34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020 34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020 34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020 34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020

Fox Racing Shox

34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory - 44mm Offset - 2020

$909.00

1 in stock

Notify me when available

910-20-717

1830 grams
1830 grams
Travel
Color
Black
-
+
This item may only be shipped within the United States.
We are required to follow our brand's policies on shipping. Currently we cannot ship the following brands outside the United States:
Ibis - Evil - GT- Fox Racing Shox - ENVE - SRAM - Rock Shox

Fox brings back the 34 platform for 2020, offering the proven FIT4 damper tune as well as EVOL technology.

3-Position FIT4 Damper
Now in it's fourth generation, the FIT4 damper tune has been tweaked and improved, featuring a reconfigured shim stack that provides more sensitivity while maintaining support under aggressive riding conditions. Fox's FIT4 damper offers three main compression settings, Open/Medium/Firm. In the open position, the fork's oil flow is maximized, providing a very plush and responsive feel overall. The medium position stiffens the initial compression, allowing the fork to ride slightly higher in it's travel, reducing pedal bob/feedback. The firm setting will be increase initial compression resistance even more, and will offer the firmest ride of the three settings. Naturally, the open setting is intended for downhill trail sections, the medium setting is intended for primarily flat trail sections, and the firm setting is intended for climbing. In the open mode, the FIT4 damper offers 22 clicks of low speed compression, though it does lack the externally adjustable high speed compression and high speed rebound that the GRIP2 damper offers (found on some of Fox's 2019 36-series forks). Why offer such a range of compression adjustment in the open setting when you could just flip the knob to the medium setting? Good question. The medium setting is intended for a quick on-the-fly switch to a firmer platform. On the inside of the fork, the medium setting, the fork has to push through a shim stack ever time it is compressed, which results in slightly harsher small bump performance. The open setting however does not utilize that shim stack, resulting in unadulterated performance - so it makes sense to give those extra 22 clicks of compression adjustability in this setting, as that is where you'll likely be spending the most time when riding.

The FIT4 utilizes a 10mm shaft and seal head design that increases oil flow to the base valve. Fox also increased flow through the rebound circuit for faster recovery from hard hits. With the increased oil flow throughout the entire damper, as well as improvements to inner seal heads, the FIT4 forks will be very plush and responsive in the open setting. 

EVOL Air Spring
The EVOL air spring remains mostly the same for 2019, though Fox did tweak it to provide a slightly more linear spring curve gives EVOL forks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. EVOL also increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.

Reduced 44mm Offset
For bikes requiring a reduced crown offset, such as the Transition Smuggler. This fork has a reduced offset of 44mm, as opposed to the standard 51mm offset on 29" forks.

In the box

  • 34 Float 29" 3-Pos FIT4 EVOL 15x110 Boost Factory
  • 3 volume spacers

Specs

Travel: 130mm, 140mm
Wheel Size: 29"
Spring: Air
Disc Mount: Post Mount 160mm
Travel Adjust: Internally Adjustable (requires additional parts)
Axle Configuraton: 15x110mm Boost
Min. Rotor Size: 160mm
Max. Rotor Size: 203mm
Crown Material: Aluminum
Lowers Material: Magnesium
Stanchion Material: Aluminum
Steertube Diameter: 1.125" - 1.5" Tapered
Crown Offset: 44mm
Intended Use: Trail / AM
Warranty: 1 year

Reviews / Q&A