942 Carbon 29" Rim
942 Carbon 29" Rim 942 Carbon 29" Rim


942 Carbon 29" Rim

Out of stock

Notify me when available


465 grams


This product ships worldwide!

    Looking for real-world advice?
    Rich is an expert on Ibis products.
    1-844-326-2845|Email Rich

    Ibis' 942 rim builds upon their successful 941 rim, boasting several new improvements and refinements. As with the 941, the 942 retains the same 41mm outer/35mm inner rim widths. The 942 features a lower cross section height for better impact resistance. The carbon layup has also been improved, combining layers of a new super tough carbon/eopoxy prepreg with their original carbon composite. Ibis has also introduced an asymmetric design that features 5mm of offset, allowing for higher spoke tensions that are nearly equal on both sides of the rim. As a result of all this, the 942 rim nets a 30% increase in impact strength while managing to decrease in weight by 7.5%, compared to the previous 941 rim. 

    A wider rim delivers better sidewall support so in many cases you can run lower pressures in your rubber. Tires mounted on wider rims don’t burp as easily. Lower pressures, even a pound or two, do several beneficial things, including increasing the contact patch, which results in better traction. Running lower pressures on varied terrain actually reduces rolling resistance. Wider rims are stronger and stiffer. With increased traction comes increased braking control.

    The 942 rims are ideal for ultra low pressures (10-18 psi) with 2.8+ tires (or 18-25psi for 2.25" - 2.5" tires). The folks at Ibis have found very positive results running any the 942 rim with the new current crop of 2.8"+ tires from Maxxis, Schwalbe, and WTB.


    • Material: Carbon
    • Inner Width: 35mm
    • Outer Width: 41mm
    • Depth: 19.5mm
    • ERD: 598.6mm
    • Offset: 5mm
    • Hole Count: 32
    • Intended Use: AM/Enduro
    • Warranty: Lifetime No Fault Crash Replacement / 7 years for defects/workmanship

    Reviews / Q&A