Specialized Stumpjumper EVO S-Works MX Frame
The Specialized S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy.
What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The S-Works Stumpjumper EVO MX Frameset, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail.
In the box
- Stumpjumper EVO MX Frame
(27.5" rear wheel link installed) - Angle adjust headset
- 22oz Swat Storage Water Bladder
- ISCG '05 Top Chain Guide
- 30.9 to 34.9 seat post shim
- Headset spacers, top cap and star nut
- Clear frame protection
- 29" rear wheel shock link (bearings included)
Features
- Specialized improved the pedaling performance of the Stumpjumper and made it more capable, agile, and lively. They increased anti-squat, so the suspension better resists pedal bob, and further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- Geometry on the Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other.
- Frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size.
- Specialized increased the volume of the SWAT door and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
Tech Specs
| Frame Material: | Carbon |
| Wheel Size: | Mixed: 29" front/27.5" rear |
| Front Suspension Travel: | 150mm (S1), 160mm (S2-S6) |
| Rear Suspension Travel: | S1=145, S2-S6=150 |
| Rear Shock: | FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm |
| Rear Shock Hardware: | Front: 8mm ID x 20mm / Rear: Open |
| Rear Axle Width: | 12x148mm Boost |
| Included Headset: | Specialized Integrated |
| BB Standard: | 73mm BSA |
| ISCG Tabs: | ISCG '05 3-Bolt |
| Brake Mount Type: | Post-Mount 180mm |
| Max Rear Rotor Size: | 220mm |
| Minimum Chainring Size: | 28T |
| Maximum Chainring Size: | 34T |
| Maximum Tire Size: | Front: 29 x 2.5" / Rear: 27.5 x 2.5" |
| Seat Post Diameter: | 34.9mm |
| Seat Clamp Diameter: | 38.6mm |
| Water Bottle Cage Mounts: | Integrated SWAT Cage |
| Intended Use: | AM/Enduro |
| Warranty: | 2 years or Lifetime with registration |
Specs subject to change without notice. Please check with manufacturer for the most up-to-date information.
Geometry
mm / inches
Stock Geometry
Insertion
Sizing
cm / ft
| Size | S1 | S2 | S3 | S4 | S5 | S6 |
|---|---|---|---|---|---|---|
| Rider Height (cm) | 150 - 160 | 157 - 173 | 165 - 180 | 173 - 188 | 178 - 193 | 188 - 203 |