OneUp Components EDC Lite Multi-Tool/Carrier
The OneUp Components EDC Lite is your ticket to never being without a multi-tool. Stealthily stashed away in your top tube, you have quick easy access when you need it.
Installing the EDC Lite carrier in your top tube is a breeze, and OneUp includes a 9-function multi-tool to complete the package.
Check out OneUp's simple installation instructions here.
Fork Compatibility: Fits most standard tapered steer tubes
Incompatible forks: Giant Overdrive 2, Cannondale Lefty, Forks with carbon steer tubes
STEERER TUBE INNER DIAMETER
The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.
STEERER TUBE LENGTH
Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.
• Fox except Fox 38 = 190mm (7.5") min
• Fox 38 = 210mm (8.25") min
• RockShox Forks = 210mm (8.25") min
Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.
- Hex Wrenches- 2, 2.5, 3, 4, 5, 6, 8mm
- T25 Torx Wrench
- Flat Head Screwdriver
- Light Weight- Just 75 Grams
- Easy 5-Minute Install