RevGrips Pro Series Standard Grip System
RevGrips Suspension Grips outperform any other grip because they do not contact your handlebar. The inner diameter of the grip is approximately 1/8 of an inch larger than the outside diameter of the handlebar and is "suspended" in an elastomer on each side of the grip. This unique design allows the grip to work WITH your hands, isolated from shock and vibration, and independent of your handlebar. Tuning washers are placed between the grip sleeve and clamp to customize feel and performance so you can allow your grip to "move" as little or as much as desired (just like a fork or shock).
In the box
- QTY(2) Grip Sleeves
- QTY(4) Ultra-Light Aluminum Clamps
- QTY(4) Suspension Insert Rings
- QTY(8) Tuning Washers
- QTY(2) Aluminum Bar End Assemblies
- QTY(5) Clamp Screws
- QTY(1) 3mm Hex Wrench
- Assembly instruction manual
Features
- Reduced shock and vibration means less hand fatigue
- Includes tuning washers to adjust feel/performance to any one of 5 different levels (from soft to firm)
- All parts can be replaced individually
Tech Specs
| Material: | Rubber |
| Locking Clamp: | Two Locking Clamps |
| Diameter: | Small: 31mm | Medium: 32.5mm | Large: 34mm | Half-waffle: 31mm |
Specs subject to change without notice. Please check with manufacturer for the most up-to-date information.
RevGrips Pro Series Standard Grip System:
Black / Black / Small (31mm): RG-3000 -
Black / Black / Medium (32.5mm): RG-3100 -
Black / Black / Large (34mm): RG-3200 -
Black / Black / Half-Waffle (31mm): RG-3300 -
Titanium Gray / Black / Small (31mm): RG-3010 -
Titanium Gray / Black / Medium (32.5mm): RG-3110 -
Titanium Gray / Black / Large (34mm): RG-3210 -
Titanium Gray / Black / Half-Waffle (31mm): RG-3310 -
Error