BSA 30mm Bottom Bracket w/ AC Bearings

Wheels Manufacturing

BSA 30mm Bottom Bracket w/ AC Bearings

$105.00

BB-BSA30-AC

102 grams

3 in stock

-
+

Wheels Manufacturing BSA 30mm Bottom Bracket w/ AC Bearings

This is Wheels Manufacturing's solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 Angular Contact sealed bearings outboard of the BB shell. Fully serviceable.

For use with 30mm diameter cranks with a spindle length of at least 104mm when used in a 68mm wide BB shell. This is the overall spindle length with all spacers and adjusters removed from the spindle. Measurement is taken from the inside face of the crank arm to the very end of the spindle.

WILL NOT work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH!

    Features

    • Angular contact bearings have a much higher speed rating than radial bearings because of the nonstop contact of the balls to both rings. Angular contact bearings can carry both radial and axial loads. The weight of the load is transferred from one ring to the other, through the balls, along a specific contact angle.

    Tech Specs

    Bearing Type: Enduro Angular Contact
    Shell Width: 68-73mm
    Spindle Interface: Race Face Cinch (30mm)
    Intended Use: MTB
    Warranty: 2 Year Limited (shell only)

    Specs subject to change without notice. Please check with manufacturer for the most up-to-date information.